If you run a unit or a fresh project in Nongmynsong, this page gives the complete picture of the TMT Bar Straightening and Cutting Machine — what it does, its specifications, the realistic price you can expect in Nongmynsong (Meghalaya), and how delivery and after-sales support work for your city.
TMT Bar Straightening and Cutting Machine — What It Does
This machine is built for regular production and is used by working units for its category. TMT bar straightening and cutting machine for processing reinforcement bars into straight, measured lengths ready for bending. Bends 8 mm - 16 mm bars, improving bar yard productivity before ring and stirrup production. It runs on standard electric supply, is simple for an operator to learn, and is designed for low-maintenance daily use.
Overview: TMT Bar Straightening and Cutting Machine The TMT Bar Straightening and Cutting Machine (Model TRBM-900) is a bar processing machine that straightens and cuts reinforcement bars into clean, measured lengths before bending. When coils or bent stock are received at a yard, this machine removes the curve and produces straight pieces of the correct length, which improves the consistency and speed of the ring bending and stirrup making stages that follow. It handles 8 mm to 16 mm TMT bars and runs on 415 V three-phase supply. For fabrication units and reinforcement steel processors, the straightening and cutting machine is the first, essential step in an efficient rebar production line. Key Features of the TMT Bar Straightening and Cutting Machine Straightening + cutting in one pass: process coil or stock bars into usable straight lengths. Set lengths on demand: cut bars to the measurement required for rings, stirrups and cranks. 8 mm - 16 mm range: handles the bars most commonly used in structural work. Consistent output: even straight bars reduce waste at the bending stage. Roller straightening system: smooth, kink-free bars ready for further processing. Time and labour saving: replaces slow manual straightening and marking. Technical Specifications Machine type: Bar Processing Machine. Function: straightening and cutting. Bar diameter: 8 mm - 16 mm. Voltage: 415 V three-phase. Frequency: 50 Hz. Warranty: 12 months. Applications and Industries This machine supports reinforcement work and steel reinforcement fabrication for construction, reinforcement steel fabrication and steel processing industries. It is typically placed in bar yards and fabrication units before ring bending, stirrup making and bar bending machines. Available Across India Supplied from Delhi NCR across India, the TMT bar straightening and cutting machine is available in Delhi, Noida, Gurugram, Ghaziabad, Faridabad, Mumbai, Pune, Bengaluru, Chennai, Hyderabad, Kolkata, Ahmedabad, Jaipur, Lucknow and all states, with installation guidance, operator training, spare parts and after-sales service. Price, Warranty and After-Sales Support The TMT bar straightening and cutting machine price is quoted on enquiry depending on bar range, motor, power input and delivery location. A 12-month warranty covers manufacturing defects, and support for installation, training, spare parts and servicing is provided. Common Questions Customers ask: What does the machine do? - it straightens and cuts TMT bars into measured lengths ready for bending. What bars does it process? - 8 mm to 16 mm. What power does it need? - 415 V three-phase. What is the price? - shared on enquiry. See the FAQ section below for more details.
The machine is supplied with the standard accessories needed to start production, and the setup is explained during handover so your team can begin working without confusion.
Why Buyers in Nongmynsong Look for This Machine
Across Nongmynsong, enquiries for the TMT Bar Straightening and Cutting Machine come throughout the year. The usual pattern is a buyer comparing two or three options, confirming the specification that fits their output, and then checking the best price and delivery time for Nongmynsong before finalising the order.
Key Specifications of the TMT Bar Straightening and Cutting Machine
TMT bar straightening and cutting machine for processing reinforcement bars into straight, measured lengths ready for bending. Bends 8 mm - 16 mm bars, improving bar yard productivity before ring and stirrup production.
| Specification | Detail |
|---|---|
| Machine Type | Bar Processing Machine |
| Function | Straightening & cutting |
| Bar Diameter | 8 mm - 16 mm |
| Voltage | 415 V, Three Phase |
| Frequency | 50 Hz |
| Warranty | 12 months |
| Application | Bar preparation before bending |
Price of the TMT Bar Straightening and Cutting Machine in Nongmynsong
The indicative starting price of the TMT Bar Straightening and Cutting Machine in Nongmynsong is ₹37,000.00. Local demand, transport distance and the dealer arrangement for Nongmynsong influence the final quotation, so this figure is shared as a working number rather than a locked rate.
Prices in Nongmynsong vary slightly from other cities of Meghalaya because of delivery distance and the local service setup. Share your exact requirement and we will confirm the final price for delivery to Nongmynsong.
All prices are in Indian Rupees (₹). Transport, loading and installation charges are confirmed separately at the time of ordering.
Availability & Delivery in Nongmynsong
Delivery of the TMT Bar Straightening and Cutting Machine to Nongmynsong is coordinated from the manufacturing unit. Once the order is confirmed, dispatch is planned so that the machine reaches Nongmynsong in the shortest possible time, and the team stays connected until installation guidance is complete.
TMT Bar Straightening and Cutting Machine in Nearby Cities and Towns of Meghalaya
Besides Nongmynsong, the TMT Bar Straightening and Cutting Machine is also supplied to Ä€mpati, Baghmara, BalÄt, Cherrapunji, Dalu, Dawki, East Garo Hills, Jowai, Lapalang and other nearby towns of Meghalaya. If your location is close to any of these, delivery planning is straightforward and the transit time is short.
For any other town in Meghalaya that is not listed here, send an enquiry with your location name and the team will confirm delivery feasibility, transport charges and the expected time before you place the order.
What to Check Before Buying
The two questions that matter most when buying a TMT Bar Straightening and Cutting Machine are the capacity you need and the volume you expect to run per day. Every other decision — automatic or semi automatic operation, power, size, accessories — follows from those two. Then compare two or three models side by side, check the build for heavy-duty quality, and confirm what is included in the quoted price such as accessories, installation and training.
Frequently Asked Questions about the TMT Bar Straightening and Cutting Machine in Nongmynsong
Need the current price and delivery quote for the TMT Bar Straightening and Cutting Machine in Nongmynsong? Call or WhatsApp 9911466628, or send an enquiry through the contact form and the team will respond with the details for Nongmynsong.