Koraput buyers looking for a TMT Bar Straightening and Cutting Machine usually want three things — a clear specification sheet, an honest city-specific price, and delivery they can rely on. This page covers exactly that, plus the questions buyers in Koraput ask most before ordering.
TMT Bar Straightening and Cutting Machine — What It Does
This machine is built for regular production and is used by working units for its category. TMT bar straightening and cutting machine for processing reinforcement bars into straight, measured lengths ready for bending. Bends 8 mm - 16 mm bars, improving bar yard productivity before ring and stirrup production. It runs on standard electric supply, is simple for an operator to learn, and is designed for low-maintenance daily use.
Overview: TMT Bar Straightening and Cutting Machine The TMT Bar Straightening and Cutting Machine (Model TRBM-900) is a bar processing machine that straightens and cuts reinforcement bars into clean, measured lengths before bending. When coils or bent stock are received at a yard, this machine removes the curve and produces straight pieces of the correct length, which improves the consistency and speed of the ring bending and stirrup making stages that follow. It handles 8 mm to 16 mm TMT bars and runs on 415 V three-phase supply. For fabrication units and reinforcement steel processors, the straightening and cutting machine is the first, essential step in an efficient rebar production line. Key Features of the TMT Bar Straightening and Cutting Machine Straightening + cutting in one pass: process coil or stock bars into usable straight lengths. Set lengths on demand: cut bars to the measurement required for rings, stirrups and cranks. 8 mm - 16 mm range: handles the bars most commonly used in structural work. Consistent output: even straight bars reduce waste at the bending stage. Roller straightening system: smooth, kink-free bars ready for further processing. Time and labour saving: replaces slow manual straightening and marking. Technical Specifications Machine type: Bar Processing Machine. Function: straightening and cutting. Bar diameter: 8 mm - 16 mm. Voltage: 415 V three-phase. Frequency: 50 Hz. Warranty: 12 months. Applications and Industries This machine supports reinforcement work and steel reinforcement fabrication for construction, reinforcement steel fabrication and steel processing industries. It is typically placed in bar yards and fabrication units before ring bending, stirrup making and bar bending machines. Available Across India Supplied from Delhi NCR across India, the TMT bar straightening and cutting machine is available in Delhi, Noida, Gurugram, Ghaziabad, Faridabad, Mumbai, Pune, Bengaluru, Chennai, Hyderabad, Kolkata, Ahmedabad, Jaipur, Lucknow and all states, with installation guidance, operator training, spare parts and after-sales service. Price, Warranty and After-Sales Support The TMT bar straightening and cutting machine price is quoted on enquiry depending on bar range, motor, power input and delivery location. A 12-month warranty covers manufacturing defects, and support for installation, training, spare parts and servicing is provided. Common Questions Customers ask: What does the machine do? - it straightens and cuts TMT bars into measured lengths ready for bending. What bars does it process? - 8 mm to 16 mm. What power does it need? - 415 V three-phase. What is the price? - shared on enquiry. See the FAQ section below for more details.
The machine is supplied with the standard accessories needed to start production, and the setup is explained during handover so your team can begin working without confusion.
Why Buyers in Koraput Look for This Machine
In Koraput and its surrounding areas, small and mid-size units keep a consistent demand for the TMT Bar Straightening and Cutting Machine. Local buyers compare price, build quality and delivery time before placing an order, and a machine that arrives with clear installation guidance is always preferred.
Key Specifications of the TMT Bar Straightening and Cutting Machine
TMT bar straightening and cutting machine for processing reinforcement bars into straight, measured lengths ready for bending. Bends 8 mm - 16 mm bars, improving bar yard productivity before ring and stirrup production.
| Specification | Detail |
|---|---|
| Machine Type | Bar Processing Machine |
| Function | Straightening & cutting |
| Bar Diameter | 8 mm - 16 mm |
| Voltage | 415 V, Three Phase |
| Frequency | 50 Hz |
| Warranty | 12 months |
| Application | Bar preparation before bending |
Price of the TMT Bar Straightening and Cutting Machine in Koraput
The indicative starting price of the TMT Bar Straightening and Cutting Machine in Koraput is ₹37,000.00. Local demand, transport distance and the dealer arrangement for Koraput influence the final quotation, so this figure is shared as a working number rather than a locked rate.
Prices in Koraput vary slightly from other cities of Odisha because of delivery distance and the local service setup. Share your exact requirement and we will confirm the final price for delivery to Koraput.
All prices are in Indian Rupees (₹). Transport, loading and installation charges are confirmed separately at the time of ordering.
Availability & Delivery in Koraput
The TMT Bar Straightening and Cutting Machine is dispatched to Koraput (Odisha) by reliable transport from the manufacturing unit. The machine is loaded carefully, and you receive the vehicle details and the expected arrival date before it leaves. For locations inside and around Koraput, delivery is arranged through the nearest transport route to keep transit time low.
TMT Bar Straightening and Cutting Machine in Nearby Cities and Towns of Odisha
Besides Koraput, the TMT Bar Straightening and Cutting Machine is also supplied to Anandapur, Angul, Asika, Balangir, Balasore, Barapali Town, Barbil, Bargarh, Baripada and other nearby towns of Odisha. If your location is close to any of these, delivery planning is straightforward and the transit time is short.
For any other town in Odisha that is not listed here, send an enquiry with your location name and the team will confirm delivery feasibility, transport charges and the expected time before you place the order.
What to Check Before Buying
Read the specification sheet twice before buying a TMT Bar Straightening and Cutting Machine. Check the rated capacity, power requirement, machine size, weight and voltage. Ask whether the quoted price is GST inclusive and whether delivery and installation are extra. Confirm how the supplier supports maintenance and spare parts in your region, and ask for the machine’s real daily output rather than marketing figures.
Frequently Asked Questions about the TMT Bar Straightening and Cutting Machine in Koraput
Need the current price and delivery quote for the TMT Bar Straightening and Cutting Machine in Koraput? Call or WhatsApp 9911466628, or send an enquiry through the contact form and the team will respond with the details for Koraput.