This is the dedicated page for the TMT Bar Straightening and Cutting Machine in Ulhasnagar, Maharashtra. You will find the machine’s specifications, an indicative price that reflects local demand, transport and delivery details for Ulhasnagar, and the support available in your region.
TMT Bar Straightening and Cutting Machine — What It Does
This machine is built for regular production and is used by working units for its category. TMT bar straightening and cutting machine for processing reinforcement bars into straight, measured lengths ready for bending. Bends 8 mm - 16 mm bars, improving bar yard productivity before ring and stirrup production. It runs on standard electric supply, is simple for an operator to learn, and is designed for low-maintenance daily use.
Overview: TMT Bar Straightening and Cutting Machine The TMT Bar Straightening and Cutting Machine (Model TRBM-900) is a bar processing machine that straightens and cuts reinforcement bars into clean, measured lengths before bending. When coils or bent stock are received at a yard, this machine removes the curve and produces straight pieces of the correct length, which improves the consistency and speed of the ring bending and stirrup making stages that follow. It handles 8 mm to 16 mm TMT bars and runs on 415 V three-phase supply. For fabrication units and reinforcement steel processors, the straightening and cutting machine is the first, essential step in an efficient rebar production line. Key Features of the TMT Bar Straightening and Cutting Machine Straightening + cutting in one pass: process coil or stock bars into usable straight lengths. Set lengths on demand: cut bars to the measurement required for rings, stirrups and cranks. 8 mm - 16 mm range: handles the bars most commonly used in structural work. Consistent output: even straight bars reduce waste at the bending stage. Roller straightening system: smooth, kink-free bars ready for further processing. Time and labour saving: replaces slow manual straightening and marking. Technical Specifications Machine type: Bar Processing Machine. Function: straightening and cutting. Bar diameter: 8 mm - 16 mm. Voltage: 415 V three-phase. Frequency: 50 Hz. Warranty: 12 months. Applications and Industries This machine supports reinforcement work and steel reinforcement fabrication for construction, reinforcement steel fabrication and steel processing industries. It is typically placed in bar yards and fabrication units before ring bending, stirrup making and bar bending machines. Available Across India Supplied from Delhi NCR across India, the TMT bar straightening and cutting machine is available in Delhi, Noida, Gurugram, Ghaziabad, Faridabad, Mumbai, Pune, Bengaluru, Chennai, Hyderabad, Kolkata, Ahmedabad, Jaipur, Lucknow and all states, with installation guidance, operator training, spare parts and after-sales service. Price, Warranty and After-Sales Support The TMT bar straightening and cutting machine price is quoted on enquiry depending on bar range, motor, power input and delivery location. A 12-month warranty covers manufacturing defects, and support for installation, training, spare parts and servicing is provided. Common Questions Customers ask: What does the machine do? - it straightens and cuts TMT bars into measured lengths ready for bending. What bars does it process? - 8 mm to 16 mm. What power does it need? - 415 V three-phase. What is the price? - shared on enquiry. See the FAQ section below for more details.
The machine is supplied with the standard accessories needed to start production, and the setup is explained during handover so your team can begin working without confusion.
Why Buyers in Ulhasnagar Look for This Machine
The demand for the TMT Bar Straightening and Cutting Machine in Ulhasnagar comes from both new setups and units upgrading their production. Because the machine is delivered, installed and supported directly, buyers in Ulhasnagar get a dependable arrangement without depending on multiple middlemen.
Key Specifications of the TMT Bar Straightening and Cutting Machine
TMT bar straightening and cutting machine for processing reinforcement bars into straight, measured lengths ready for bending. Bends 8 mm - 16 mm bars, improving bar yard productivity before ring and stirrup production.
| Specification | Detail |
|---|---|
| Machine Type | Bar Processing Machine |
| Function | Straightening & cutting |
| Bar Diameter | 8 mm - 16 mm |
| Voltage | 415 V, Three Phase |
| Frequency | 50 Hz |
| Warranty | 12 months |
| Application | Bar preparation before bending |
Price of the TMT Bar Straightening and Cutting Machine in Ulhasnagar
The indicative starting price of the TMT Bar Straightening and Cutting Machine in Ulhasnagar is ₹43,000.00. Local demand, transport distance and the dealer arrangement for Ulhasnagar influence the final quotation, so this figure is shared as a working number rather than a locked rate.
Prices in Ulhasnagar vary slightly from other cities of Maharashtra because of delivery distance and the local service setup. Share your exact requirement and we will confirm the final price for delivery to Ulhasnagar.
All prices are in Indian Rupees (₹). Transport, loading and installation charges are confirmed separately at the time of ordering.
Availability & Delivery in Ulhasnagar
Orders for the TMT Bar Straightening and Cutting Machine are delivered to Ulhasnagar with a simple handover process — the machine is unloaded at your location as agreed, and the setup team explains installation and operation. Buyers across Maharashtra, including Ulhasnagar, get the same direct delivery and support arrangement.
TMT Bar Straightening and Cutting Machine in Nearby Cities and Towns of Maharashtra
Besides Ulhasnagar, the TMT Bar Straightening and Cutting Machine is also supplied to Achalpur, Ahmadnagar, Akola, Ambernath, Amravati, Badlapur, Barshi, Beed, Bhiwandi and other nearby towns of Maharashtra. If your location is close to any of these, delivery planning is straightforward and the transit time is short.
For any other town in Maharashtra that is not listed here, send an enquiry with your location name and the team will confirm delivery feasibility, transport charges and the expected time before you place the order.
What to Check Before Buying
Before buying a TMT Bar Straightening and Cutting Machine, confirm the capacity you need, your expected daily output, the space available at your site and the electric supply you can provide. Compare machines on build quality, capacity, power consumption and after-sales support rather than price alone. Ask for a live demonstration or customer references, and confirm the warranty, spare parts availability and delivery time for your city before finalising.
Frequently Asked Questions about the TMT Bar Straightening and Cutting Machine in Ulhasnagar
Need the current price and delivery quote for the TMT Bar Straightening and Cutting Machine in Ulhasnagar? Call or WhatsApp 9911466628, or send an enquiry through the contact form and the team will respond with the details for Ulhasnagar.